MaharashtraMetroFeed TDS 180-420 ppmmoderate

Commercial & Industrial RO Plants in Mumbai

25 LPH office systems to 4,000+ LPH industrial plants, engineered against Mumbai's actual feed water — with installation, commissioning and AMC across Maharashtra.

Pan-India installation & service
AMC support available
Free site water-quality audit
Custom-engineered to your TDS

We supply, install and service commercial and industrial RO plants across Mumbai and Maharashtra — from 25 LPH office systems through to multi-thousand LPH industrial plants.

Mumbai has substantial commercial and industrial demand, and feed-water quality here — typically 180-420 ppm TDS from treated municipal supply drawn from surface sources such as rivers — directly determines the pre-treatment train your plant needs.

Local water is moderately hard, which keeps pre-treatment requirements comparatively modest and improves membrane life. Every quotation is engineered against your own water analysis report.

Designing for Mumbai feed water

Feed TDS band: 180 - 420 ppm
Hardness: moderate
Dominant source: Treated surface water
Pre-treatment implication: Standard sand + carbon usually sufficient
Expected recovery: 50-65%
Membrane class: Standard brackish-water RO

TDS and AQI figures on this page are indicative planning ranges compiled from publicly reported patterns for this city — not live readings. Actual values vary by locality, borewell depth and season. Test your own supply with a TDS meter (around ₹300), and get a laboratory analysis if you suspect arsenic, fluoride, nitrate or iron.

Capacity guide for Mumbai facilities

Commercial RO plant capacity and cost guide for Mumbai
Capacity	Ideal for	Indicative capex
25 LPH	Small offices, clinics, retail outlets, 15-30 people	₹25,000 - ₹45,000
50 LPH	Mid-size offices, cafes, hostels, 30-60 people	₹45,000 - ₹75,000
100 LPH	Offices, cafes, schools, small hotels, 60-120 people	₹75,000 - ₹1.5 lakh
250 LPH	Hostels, mid-size hotels, housing societies up to 60 flats, factories' drinking lines	₹1.5 lakh - ₹3 lakh
500 LPH	Factories, hospitals, large complexes, societies of 60-150 flats	₹3 lakh - ₹6 lakh
1000 LPH	Manufacturing plants, large hospitals, campuses, packaged-water units	₹6 lakh - ₹12 lakh
2000 LPH	Large factories, packaged drinking water plants, textile and food processing	₹12 lakh - ₹22 lakh
4000 LPH	Manufacturing and chemical processing, boiler feed, large bottling operations	₹22 lakh - ₹45 lakh

Industrial areas we serve in Mumbai

We supply and service commercial and industrial water treatment systems across Mumbai's manufacturing and commercial clusters, including:

Andheri MIDC
Marol
Saki Naka
Chandivali

If your facility sits in one of these clusters, mention it in your enquiry — plant rooms in established industrial estates often have specific space, drainage and electrical constraints that we can design around from the outset rather than discover at installation.

By industry in Mumbai

Commercial RO plants in Mumbai — FAQs

What is the price of a commercial RO plant in Mumbai?

Indicatively: 100 LPH ₹75,000-₹1,50,000; 250 LPH ₹1,50,000-₹3,00,000; 500 LPH ₹3-6 lakh; 1,000 LPH ₹6-12 lakh. In Mumbai specifically, feed water at 180-420 ppm and moderate hardness means pre-treatment requirements are comparatively modest, which keeps you nearer the lower end of each band. A firm quotation requires a water analysis report.

Do you install and service commercial RO plants in Mumbai?

Yes — supply, installation, commissioning and AMC across Mumbai and Maharashtra. Standard 100-500 LPH commercial systems are typically installed within 48-72 hours of site readiness; custom industrial plants take 7-14 days. Response times and local spares holding are stated in writing in the AMC rather than left to assumption — tell us your site location and we will confirm applicable coverage before you order.

What pre-treatment does Mumbai's water need for a commercial RO plant?

With local feed water at 180-420 ppm TDS and moderate hardness, the typical requirement is a multigrade sand filter, an activated carbon filter, with antiscalant dosing specified based on your actual hardness figure. Final design always follows a water analysis.

Which capacity RO plant do I need for my Mumbai facility?

Allow 3-4 litres per person per day for drinking water. Up to 15 people a domestic RO suffices; 15-40 people needs 25-50 LPH; 40-120 needs 100 LPH; 120-300 needs 250 LPH; 300-800 needs 500 LPH. Size on peak draw plus storage rather than daily average — storage is almost always cheaper than extra plant capacity. Our TCO calculator sizes it for you.

What does AMC cost for a commercial RO plant in Mumbai?

Comprehensive AMC including membranes, cartridges and pump cover typically runs 10-14% of capital cost annually; non-comprehensive covering visits and labour only runs 5-8%. Always get the inclusion list itemised and a written response time.

Need a commercial RO quote for your Mumbai site?

Share your output requirement and water analysis report, and our technical team will design a system with capex, five-year operating cost and AMC options — sized for Mumbai's feed water.

Email our technical team