MaharashtraTier 2Feed TDS 200-500 ppmmoderate

Commercial & Industrial RO Plants in Thane

25 LPH office systems to 4,000+ LPH industrial plants, engineered against Thane's actual feed water — with installation, commissioning and AMC across Maharashtra.

Pan-India installation & service
AMC support available
Free site water-quality audit
Custom-engineered to your TDS

We supply, install and service commercial and industrial RO plants across Thane and Maharashtra — from 25 LPH office systems through to multi-thousand LPH industrial plants.

Thane has substantial commercial and industrial demand, and feed-water quality here — typically 200-500 ppm TDS from treated municipal supply drawn from surface sources such as rivers — directly determines the pre-treatment train your plant needs.

Local water is moderately hard, which keeps pre-treatment requirements comparatively modest and improves membrane life. Every quotation is engineered against your own water analysis report.

Designing for Thane feed water

Feed TDS band: 200 - 500 ppm
Hardness: moderate
Dominant source: Treated surface water
Pre-treatment implication: Standard sand + carbon usually sufficient
Expected recovery: 50-65%
Membrane class: Standard brackish-water RO

TDS and AQI figures on this page are indicative planning ranges compiled from publicly reported patterns for this city — not live readings. Actual values vary by locality, borewell depth and season. Test your own supply with a TDS meter (around ₹300), and get a laboratory analysis if you suspect arsenic, fluoride, nitrate or iron.

Capacity guide for Thane facilities

Commercial RO plant capacity and cost guide for Thane
Capacity	Ideal for	Indicative capex
25 LPH	Small offices, clinics, retail outlets, 15-30 people	₹25,000 - ₹45,000
50 LPH	Mid-size offices, cafes, hostels, 30-60 people	₹45,000 - ₹75,000
100 LPH	Offices, cafes, schools, small hotels, 60-120 people	₹75,000 - ₹1.5 lakh
250 LPH	Hostels, mid-size hotels, housing societies up to 60 flats, factories' drinking lines	₹1.5 lakh - ₹3 lakh
500 LPH	Factories, hospitals, large complexes, societies of 60-150 flats	₹3 lakh - ₹6 lakh
1000 LPH	Manufacturing plants, large hospitals, campuses, packaged-water units	₹6 lakh - ₹12 lakh
2000 LPH	Large factories, packaged drinking water plants, textile and food processing	₹12 lakh - ₹22 lakh
4000 LPH	Manufacturing and chemical processing, boiler feed, large bottling operations	₹22 lakh - ₹45 lakh

Industrial areas we serve in Thane

We supply and service commercial and industrial water treatment systems across Thane's manufacturing and commercial clusters, including:

Wagle Estate
Kolshet
Bhiwandi warehousing belt

If your facility sits in one of these clusters, mention it in your enquiry — plant rooms in established industrial estates often have specific space, drainage and electrical constraints that we can design around from the outset rather than discover at installation.

By industry in Thane

Commercial RO plants in Thane — FAQs

What is the price of a commercial RO plant in Thane?

Indicatively: 100 LPH ₹75,000-₹1,50,000; 250 LPH ₹1,50,000-₹3,00,000; 500 LPH ₹3-6 lakh; 1,000 LPH ₹6-12 lakh. In Thane specifically, feed water at 200-500 ppm and moderate hardness means pre-treatment requirements are comparatively modest, which keeps you nearer the lower end of each band. A firm quotation requires a water analysis report.

Do you install and service commercial RO plants in Thane?

Yes — supply, installation, commissioning and AMC across Thane and Maharashtra. Standard 100-500 LPH commercial systems are typically installed within 48-72 hours of site readiness; custom industrial plants take 7-14 days. Response times and local spares holding are stated in writing in the AMC rather than left to assumption — tell us your site location and we will confirm applicable coverage before you order.

What pre-treatment does Thane's water need for a commercial RO plant?

With local feed water at 200-500 ppm TDS and moderate hardness, the typical requirement is a multigrade sand filter, an activated carbon filter, with antiscalant dosing specified based on your actual hardness figure. Final design always follows a water analysis.

Which capacity RO plant do I need for my Thane facility?

Allow 3-4 litres per person per day for drinking water. Up to 15 people a domestic RO suffices; 15-40 people needs 25-50 LPH; 40-120 needs 100 LPH; 120-300 needs 250 LPH; 300-800 needs 500 LPH. Size on peak draw plus storage rather than daily average — storage is almost always cheaper than extra plant capacity. Our TCO calculator sizes it for you.

What does AMC cost for a commercial RO plant in Thane?

Comprehensive AMC including membranes, cartridges and pump cover typically runs 10-14% of capital cost annually; non-comprehensive covering visits and labour only runs 5-8%. Always get the inclusion list itemised and a written response time.

Need a commercial RO quote for your Thane site?

Share your output requirement and water analysis report, and our technical team will design a system with capex, five-year operating cost and AMC options — sized for Thane's feed water.

Email our technical team